12
TECHNICAL DATA
The product conforms with the
EC Directive 93/42/EEC
(MDD) for medical products.
Tyre fill pressure:
The following pressure values can be
taken as standard values:
Steering wheel:
Standard Code 645 = 2.5 bar
Driving wheel:
Standard Code 486 = 4.0 bar
Always observe the maximum tyre fill
pressure indicated on the tyre cover!
MODEL 3.310
All length and height information in table
1 pertains to the following PRIMUS II
version:
– Seat width 38 cm
– Backrest height 40 cm
– Depth of seat 40 cm
– Armrest code 81
– Drive wheel position central
– Wheel size 24"
– Handrim distance 15 mm
– Lower legrest part code 806
Measuring tolerance ±1.5 mm.
The overall length depends on the posi-
tion and size of the driving wheels.
With the driving wheel position in the
rear, the length is extended by 2 cm.
MODEL 3.311
All length and height information in table
2 pertains to the following PRIMUS II
active version:
– Seat width 38 cm
– Backrest height 40 cm
– Depth of seat 42 cm
– Armrest code 101
– Front position of the driving wheel
– Wheel size 24"
– Handrim distance 15 mm
– Lower legrest part code 54
Measuring tolerance ± 1.5 mm
The overall length depends on the posi-
tion and size of the driving wheels.
With the driving wheel position in the
rear, the length is extended by 4 cm.
!
Attention:
The maximum admissible passenger
weight reduces in accordance with
the number of additional mounted
parts and possible luggage.
The admissible passenger (person)
weight is calculated on the basis of:
maximum passenger weight (Table
1)
– actual weight
= admissible weight for
luggage or mounted parts.
I.e., the passenger and luggage
may not weigh more than the speci-
fied maximum passenger weight of
120 kg.
If the actual weight of the passenger
exceeds the calculated maximum
user (person) weight, reduce the
weight of additional mounted parts
and luggage.
If this is not possible, a more stable
version or another wheelchair model
must be used. Contact your MEYRA
specialist dealer in this respect.
+
Remark:
The maximum loading is 120 kg.
The continuous foot board code 54
and the stabiliser rod code 138
must be used for safety reasons
when the loading is 100 kg or
greater.
The wheelchair is supplied with a
double crossbrace when the seat
width is 48 cm or greater.
