23
22
Transport security
Carry out the following steps when the
wheelchair is located in the transport
vehicle:
– Operate parking brakes.
– Check the locking devices of de-
tachable parts, or if necessary re-
move them (e.g. side elements,
armrests) and store them safely and
protected.
– Secure the wheelchair by way of
elasticated straps.
Only affix the elasticated belts to parts
of the car envisaged for this purpose
and to the frame tubes of the wheel-
chair!
To secure the wheelchair, use the front
crossbrace (fig. 16) as well as the loops
at the side (fig. 17).
▲
Do not use the armrests, legrests or
the push bar for lashing the wheel-
chair. Only use permitted fastening
material.
17
16
☞
Note:
☞
Suitable fixing points can usually
be found in the car and in the ve-
hicle operating manual.
☞
Before transporting the wheelchair,
ask your car dealer how to secure
it without risk to the existing fix-
tures or other safety fittings!
!
Attention:
Make sure that the operating mod-
ule is switched off and the selec-
tion lever for the driving motors is
set to driving mode.
Safety informations
☞
Loose object are to be stored se-
curely.
