45
44
63
CONTROL UNIT FOR AC-
COMPANYING PERSON
The control unit for accompanying
person enables the accompanying per-
son an easy control of the wheelchair
with auxiliary operating module (fig.
63).
Positioning the controller
☞
Note:
Switch off the operating module
before position adjustment! – This
prevents an unwanted movement
of the wheelchair.
Height adjustment
Hold the operating module and then
slacken the clamping screw (fig. 63/
➀
).
Move the operating module into the
desired position and retighten the
clamping screw.
Angle adjustment
Hold the operating module and then
slacken the clamping screw (fig. 64/
➁
).
Swivel the operating module into the
desired position and retighten the
clamping screw.
64
1
HEADREST
The headrest (fig. 61) is swivel proof,
height adjustable and removable.
!
Attention:
We recommend the fitting of two
rear-view mirrors for driving with
a headrest.
Adjustment of the headrest
The headrest can be detached or ad-
justed in height after the clamping
lever (fig. 62/
➀
) has been slackened.
Slacken the clamping screws (fig. 62/
➁
) and position the headrest at the
desired height. Tighten the clamping
screws (fig. 62/
➁
).
!
Attention:
The maximum height adjustment
is indicated by the marking!
•
Observe the brochure <
Safety in-
formation electronic vehicles
>!
61
62
2
1
2
