61
60
Rear light
Festoon bulb:
24V/C5W S8.5
Tools:
Phillips screwdriver
☞
Note:
Use a dry cloth to hold the glass
body of the new filament bulb.
Removal
– Switch off the control unit.
– Pull out the main fuse.
– Undo the securing screws and re-
move the lens (fig. 85).
– Press the defective festoon bulb
against the holding pin (fig. 85/
➀
)
and then pull it out of the holder.
Mounting
– Insert the new festoon bulb. – Press
one tip into the hole in the hold-
ing pin and then press the other
tip into the hole of the other hold-
ing pin (fig. 85/
➀
).
– Mount the lens. – Press in the lens
and fasten it with the securing
screws (fig. 86).
85
86
Rear indicator
Spherical bulb:
24V/21W BA15s
Tools:
Phillips screwdriver
☞
Note:
Use a dry cloth to hold the glass
body of the new filament bulb.
Removal
– Switch off the control unit.
– Pull out the main fuse.
– Undo the securing screws and re-
move the lens (fig. 83).
– Press the defective spherical bulb
lightly into the holder against the
spring and then turn the bulb and
pull it out of the bulb holder (fig.
83/
➀
).
Mounting
– Insert a new spherical bulb. – Push
the side pins (bayonet catch) into
the frame, exert slight pressure
against the spring and turn until
the bayonet catch clicks into place
(fig. 83/
➀
).
– Mount the lens. – Press in the lens
and fasten it with the securing
screws (fig. 84).
83
84
1
1
