13
12
Selecting the push mode
1. Switch off the operating module
because the pushing will otherwise
be made difficult by the electric
system.
2. Pull the locking sleeve (fig. 4/
➀
)
up and then push the selection le-
ver to the rear (fig. 5).
☞
The wheelchair can now be pushed.
Selecting the motor mode
1. Push the selection lever to the front
(fig. 4) until it audibly latches.
2. Switching the operating module
on. The vehicle is now ready for
driving again.
5
4
DRIVE-/PUSH MODE
The lever (fig. 3/
➀
) for switching the
drive motors between the drive mode
and push mode is located on the right
side of the wheelchair (optional: le-
ver on the left side).
!
Attention:
Push the wheelchair only for ma-
noeuvring or in emergency cases
but never on gradients.
The electric magnetic brakes are
switched off in the push mode. A
braking of the wheelchair is then
only possible by switching to the
drive mode. Therefore do not
switch to the push mode on gradi-
ents.
3
1
1
