10
PRE-OPERATION
CHECKS
Top-speed indication on LCD
control box (Fig. 11)
The pre-selected top speed is stored
when the control box is switched off (by
pressing the ON/OFF key [34] (Fig.
11) and used as the default value when
the next switch-on occurs.
The top speed can be set to one of 4
levels (each 25%) with the
- and
- keys (also whilst driving).
The symbol [27] indicates the selected
top speed.
Symbol:
(pre-selection indication)
Level 4 = 100% (maximum
top speed)
Level 3 = 75% (almost
max. top speed)
Level 2 = 50% (top speed
reduced to one-half
Level 1 = 25% (greatly re-
duced top speed)
CONTROL BOX
THE LCD DISPLAY
(liquid crystal display [39])
Warning indication (Fig. 9):
Symbol
Function
Blinks when left direction indicator se-
lected.
Blinks when push mode selected (drive
and/or steering disengaged).
Appears when headlight is switched on.
Blinks when right direction indicator se-
lected.
Shows the max. top speed setting (see
'Pre-operation checks' section).
Shows the battery charge state (see
'Pre-operation checks' section).
Blinks when hazard warning indication
selected.
