13
!
Attention:
For safety reasons, the adjustments
must be made when the wheelchair
is stationary!
• Danger of overturning during incline
and obstacle travel with inclined sit-
ting position!
Switch on the control
box
0. Speed
Shows the momentary driving
speed.
–
Changing the maximum top
speed with the
- and
-
key is possible before and
during travel.
1. Light
The lights can be switched on/off
with:
–
the
- and
-keys or by
–
a right/left shifting of the joy-
stick.
2. Daily kilometre indicator
–
Set to zero by simultaneous
pressing the
- and
-
keys.
–
Maximum top speed can be
set by pressing either the
-
or
- keys.
The battery and km/h
indications have been
deliberately omitted in
the following LCD dis-
play illustrations.
CONTROL BOX
ADJUSTMENT OPTIONS
The speed indication appears on the
LCD display after the control box has
been switched on.
You can call up the next function on the
function display by pressing the MODE
key [42]. The number of available func-
tions depends on the optional equipment
fitted to the wheelchair.
MODE
MODE
continued on next page
!
Attention:
Danger of overturning during incline and obstacle travel! Adjustments should only be made when the wheelchair is stationary!
It may be necessary to significantly reduce and adapt the speed to the individual situation. Depending on the fitted electric
adjustment options (e.g. code 25, 27, 86, 118), there may be a significant negative change in the driving behaviour of the
wheelchair that is dependent on the degree of adjustment. Depending on the fitted adjustment option, the top speed will be
automatically reduced when driving with settings deviating from the basic sitting position.
MODE
+
Remark:
An error code will appear on the func-
tion display in the event of a wheelchair
malfunction (see 'Fault correction' part of
the 'Service' section).
