24
SERVICE
Maintenance
Like any other technical product, your
wheelchair also requires maintenance.
The following maintenance instructions
describe in table form the work that has
to be carried out so that you can enjoy
the benefits of your wheelchair (e.g.
road/operating safety and high kilomet-
ric performance) even after lengthy use.
+
Remark:
Do not clean the wheelchair using
a high-pressure cleaner – Danger
of short circuit!
Water jets can cause damage to
the electronics and the control box.
Care
Seat and backrest cover:
Clean the covers with warm water. In
the case of stubborn soiling, the fabric
can be washed with a standard washing
powder for delicate fabrics. Spots can
be removed with a sponge or a soft
brush.
+
Remark:
Do not use aggressive cleaning
agents e.g. solvents, or hard brush-
es etc.
Rinse with clear water and let get dry.
Plastic parts:
The plastic panels and parts are made
of high-quality plastic. Take care of
these by means of standard plastics
cleaning agents. Always observe the
specific product information.
Spare parts
can only be ordered through your spe-
cialized dealer. If repair is necessary,
only use original MEYRA spare parts.
In order to ensure the correct delivery of
a spare part, always quote the corre-
sponding frame number of the wheel-
chair!
If any modifications have been made to
the wheelchair, the specialized dealer
is required to enclose the appropriate
code no. (e.g. Assembly Instructions) as
well as the date of the modifications,
along with the operating instructions for
the wheelchair.
This ensures that no incorrect details will
be given for future orders of spare
parts.
+
Remark:
Maintenance/modification work
and adjustments on the wheelchair
should only be carried out when in
drive mode and with removed
drive key!
The main fuse must also be re-
moved when working on the elec-
trical system (Fig. 40). – Accident
risk resulting from inadvertent
movement of the wheelchair!
Disposal
The wheelchair packing should be dis-
posed of as recyclable material.
The metal parts should be disposed of
as scrap metal.
The plastic parts should be disposed of
as recyclable plastic.
Electrical components and printed cir-
cuit boards should be disposed of as
electrical scrap.
The disposal must occur in accordance
with the respective national regulations.
Please enquire about local disposal ar-
rangements at your municipal authority.
Finish:
The high quality finish ensures an opti-
mum of protection against corrosion. If
the surface finish is damaged by scratch-
es or similar, touch it up with a varnish
pen available from us. Occasional ap-
plication of a light cover of oil to all
moving parts (see also Maintenance In-
structions) will ensure that your wheel-
chair will give you many years of serv-
ice.
Repairs
If any repairs are required, please con-
tact your specialist workshop. Personnel
there are well trained to carry out the
work required.
Customer Service
Should you have any enquiries or need
any assistance, please contact your lo-
cal MEYRA specialized dealer, who has
been trained in our factory in accord-
ance with our guidelines and who can
offer advice, customer service and re-
pairs. We have a dealer network of
approx. In this way all wishes can be
fulfilled.
