6
PLEASE NOTE!
WHEN USING THE MICROSCOPE WITH THE MODELS PUK111,
PUK2 OR PUK3, THE LED LAMP MUST BE DISCONNECTED FROM THE WELDER.
To power the LED lamp when using these models, it is necessary to u
se
a transformer
plug. This is available as an optional extra.
Plug in the transformer plug into a suitable mains socket.
WARNING: before connecting the stereo microscope to the power supply, check
that the supply voltage is compatible with the voltage shown on the stereo
microscope.
4-2 DESCRIPTION OF PARTS
(fig. 1)
