CD-3706/P
Operator’s
Guide
Document Revision: 030501.1
5000 Series
Operator’s Guide
Document Revision:080504
Page 28
•
Upon successful completion, the copied disc(s) will be ejected. The
screen will now read:
•
Press the “START/YES” key, and you will be returned to the main
operating screen:
Note:
If discs failed to
COPY
properly, the recorder tray drawer
will stay closed, and the screen will read ”Copy Failed, Press
Start”. This points to a problem with the copied CD. This
copy should not be used.
Multiple Images Enabled
To make copies from hard disk images that were previously created with
the
Multiple Images
feature “enabled”, the steps are as follows:
•
From the main operating screen depicted below:
•
Load as many blank discs as are required into the recorders. Press the
“COPY” key on the keypad. The screen will now read:
•
Press the “START/YES” key. The screen will now read: