background image

CD-3706/P

 

Operator’s

Guide

Document Revision: 030501.1

5000 Series

 

Operator’s Guide

Document Revision:080504

Page 57

 

Use the default JOB ID or enter your own. This is a handy way to identify your
job making it easy to recognize what job is running.

 

In the box under TOTAL, enter the desired quantity of discs

 

Click on the BROWSE IMAGE button and select an image file to use (.ISC, .ISO,
or .IMG). Likely this will be the .ISC file made in the previous step.

 

Leave LABEL blank as the CD-5906EC does not support in-line direct to disc
printing so you need not enter anything here. Consider the MF Digital 3000 Series
for automating duplication and printing if desired.

 

Select the desired job options:

COPY:

If you would like to write the disc, check this option. Typically this
will always be checked

VERIFY:

If you would like to verify the disc, select this option. This will
perform a bit-for-bit verify of the disc. Selecting COPY and TEST
at the same time will perform a 

VERIFY 

on the disc once written

PRINT:

Not applicable here, but on systems supporting direct-to-disc in-line
print, this option could be selected to enable printing

Summary of Contents for 5000 Platform Series


































































Reviews: