CD-3706/P
Operator’s
Guide
Document Revision: 030501.1
5000 Series
Operator’s Guide
Document Revision:080504
Page 58
•
Next choose which systems you wish to allocate to the job. If not networked, or if
this is the only MF Digital stand-alone system on your network, only
LOCALHOST will appear. If you have other unit but they do not appear, go to the
LOCALHOST TAB, click on connect to add other stand-alones. Once connected,
you may start up jobs on multiple systems simultaneously. To add systems, simply
left click on the desired system to use and then click on the ADD MACHINE.
Optionally you may add all available systems by clicking on ADD ALL. The
REMOVE buttons can be used to unallocated that system from the job you are
about to launch.
•
Once you have filled in the appropriate fields and you are happy with your
selections, click on the OK button and your job will start: If it does not, be sure
you have 1 GB of free space on the hard disc
