CD-3706/P
Operator’s
Guide
Document Revision: 030501.1
5000 Series
Operator’s Guide
Document Revision:080504
Page 60
Setting The Internal Clock
The Scribe EC Standalone’s internal clock is set at the factory for Eastern
Standard Time (observing daylight savings when applicable).
To set the internal clock, the steps are as follows:
•
Press the “7” key on the keypad. The screen will now read:
Press the “Stop/No” and you will be prompted to set the “System
Time.”
•
Press the “Start/Yes” key if you would like to set the system time.
The screen will then read:
•
Press the “Start/Yes” key after each entry.
•
You will then be returned to the main operating screen:
