MF Digital 5907-VL
Revised 10-21-05
8
3. COPY&VERIFY
This operation will start the copying process and will be followed by a verification process to
ensure data’s correctness. Therefore, the duplicator will not eject discs until verification is
complete.
a. This operation will copy the Master Source onto Blank CD/DVD discs. Before the use of this function,
ensure that the correct reading source and blank discs have been set.
b. The system will automatically display how many discs were detected.
c. When the system is ready to copy, press
ENT
to execute CD/DVD copying.
d. When the system starts the copying process, it will start loading the disk. It will then analyze the disks,
and then start copying. During the copying process, the LCD screen will display the Master Source Disc’s
data size and copying progress
e. When finished, the system will continue a verification to make a disc Readability check..
f. When the verification is complete, the Writer Trays will automatically eject the completed discs.
3.Copy&Verify
7 discs detected
Î
Press ENT to load
discs
Î
Copy&Verify
Loading Disc
Î
Analyzing
source
disc
Î
Copy&Verify79:45
Analyze Disc…
Î
Start
Copying
Î
Copy 79:45
10% 08:00
Verify 79:45
Î
Copying finished and
start verification
Î
45% 35:45
Î
100%finished
and Eject discs
•
Use verification make a
Disc Readability Check
. This operation will check the master disc and the copied
discs’ readability to make sure all of the copies are readable.
4. COPY&COMPARE
This operation will start the copying process, and then it will continue with a Comparison
process to ensure data correctness. Therefore, the duplicator will not eject discs until a disc
Comparison is complete.
a. This operation will directly copy the Master Source onto a blank CD/DVD disc. Before the use of this menu,
make sure you have put the correct reading source and blank discs.
b. The system will automatically display how many blank discs are detected.
c. When the system is ready to copy, just place
ENT
to execute CD/DVD copies.
d. When the system starts the copying process, it will start loading the disk. It will then analyze the disks, and
then start copying. During the copying process, the LCD screen will display the Master Source Disc’s data
size and copying progress.
e. When finished, the system will continue with the Comparison process to ensure the discs are exact copies
of the master source.
f. When the Comparison is finished, the Writer Trays will eject the discs.
4.Copy&Compare
7 discs detected
Î
Press ENT to load
discs
Î
Copy&Compare
Loading Disc
