DIRECTOR EC Series Operator’s Guide
Document Revision: 080904
Page 26
•
Click the ASYNCHRONOUS MODE pull down and select the desired
“disabled” or “level O” setting (
level 1 and level 2 not used
).
Default Job File Folder (Required)
The DEFAULT JOB FILE FOLDER field is used to specify the default
location where job files (*.JOB) will be saved. The factory setting
(C:\CDDIRECTOR\Jobs\) should be sufficient for most uses. To change
the default setting:
•
Click the
Browse
button below the DEFAULT JOB FILE FOLDER
field.
•
Select the volume and Director EC where you wish to save job files.
•
Click the
OK
button.
Default Image File Folder (Required)
The DEFAULT IMAGE FILE FOLDER field is used to specify the default
location where disc image script (*.ISC) will be saved. The factory setting
(C:\CDDIRECTOR\Images\) should be sufficient for most uses. To change
the default setting:
•
Click the
Browse
button below the DEFAULT IMAGE FILE FOLDER
field.
•
Select the volume and Director EC where you wish to save disc image
files.
•
Click the
OK
button.
Default Label File Folder (Required)
The DEFAULT LABEL FILE FOLDER field is used to specify the default
location where disc label files (*.LBL) will be saved. The factory setting
(C:\CDDIRECTOR\Labels\) should be sufficient for most uses. To change
the default setting:
•
Click the
Browse
button below the DEFAULT LABEL FILE FOLDER
field.
•
Select the volume and Director EC where you wish to save disc label
files.
•
Click the
OK
button.
