Page 12
Director EC Office Publisher
with OptiEC PRO Printer
Installation Guide
Document Revision: 12/28/2004
Aligning the Drive Tower
(fig. 3)
(fig. 4)
(fig. 5)
1. From your Start Menu Open the
SCRIBE EC
Alignment Utility
(fig. 1)
. It will be located in
the folder designated when you installed the
alignment utility. Choose the appropriate COM
Port which the Scribe EC Loader is installed
on and Click
Start Test.
2.
Follow the instructions by opening the top
CD/DVD drive tray, and Clicking
Yes
(fig. 2)
.
The picker arm will hover a disc over the drive
tray, observe the discs position and make the
appropriate adjustments to the drive tower
(fig.
3)
.
3.
Click
Yes
when you are satisfied with your
adjustment
(fig. 4)
.
4. The picker arm will then place the disc onto
the drive tray. Follow the on screen
instructions and click
OK
(fig. 5)
.
5. Once you are satisfied with the drive tower
alignment, tighten the thumb-screws located
on
both
sides of the drive tower
(fig. 6)
.
(fig. 1)
(fig. 6)
(fig. 3)