DICOMBurner: User Manual [
DB-UM-3 – Rev B
]
53
12.3 Log Configuration
The “
Log Configuration
” tab allows setting some parameters related to the production of log by
DICOMBurner. A description of each configuration parameter available in this dialog box is now provided:
•
Log Verbosity Configuration
:
o
Enable log on the “View Log” dialog
: enables/disables the log output on the View Log
dialog box. Disabling the log on the “
View Log
” window may be useful in cases where
DICOMBurner may run unattended for long time periods, since a long log output on the View
Log window may consume a lot of memory. In any case, DICOMBurner periodically performs
an automatic truncation of the log on window.
o
Enable Verbose Mode
: enables/disables the Verbose Mode. If the Verbose Mode is
enabled, the logged information presents a higher level of detail.
•
Debug Mode Configuration
:
o
Enable Debug Mode
: enables/disables the Debug Mode. If the Debug Mode is enabled, a
debug file is produced by DICOMBurner, containing all the main events occurring inside
DICOMBurner and the main performed actions.
o
Debug file pathname
: allows specifying, through the “
Browse…
” button, the pathname of
the Debug file.
The following picture shows a snapshot of the “
Log Configuration
” tab:
