Page 12
Aligning the Prism Plus Printer
(fig. 3)
(fig. 4)
(fig. 5)
Alert:
Before starting the Alignment Utility,
position the back end of the inkjet printer
in line with the dotted line on the top of
the drive bay.
1. From your Start Menu Open the
SCRIBE EC
Alignment Utility
(fig. 1)
. It will be located in
the folder designated when you installed the
alignment utility. Choose the appropriate COM
Port which the Scribe EC Loader is installed
on and Click
Perform Test.
2.
Follow the instructions and Click
Yes
(fig. 2)
.
The picker arm will hover a disc over the
printer tray, observe the discs position and
make the appropriate adjustments to the inkjet
printer
(fig. 3)
.
3.
Click
Yes
when you are satisfied with your
adjustment
(fig. 4)
.
4. The picker arm will then place the disc onto
the printer tray. Follow the on screen
instructions and click
OK
(fig. 5)
.
5. Once you are satisfied with the inkjet printer
alignment, tighten the thumb-screws located
on
both
side of the printer
(fig. 6)
.
(fig. 2)
(fig. 1)
(fig. 6)