MFJ-1046 Instruction Manual
Passive Preselector
2
Operation
With the MFJ-1046 Passive Preselector properly connected, simply turn the
Band
switch to the desired band and adjust the
Tune
control for maximum
signal level. With the
Bypass
switch depressed, the MFJ-1046 Passive
Preselector becomes active.
Adjust the
Tune
control for maximum signal level. The maximum loss on the
desired amateur band is less than 5dB if the correct frequency range is selected.
Note:
Always use the highest frequency band range that covers the desired band
for minimum loss.
Typical frequency response is shown in Figure 2.
A: Transmission Loss
Figure 2
