VEC-821KC Assembly Manual
Super CW Filter
2
PARTS LIST
The Parts List below is for the VEC-821KC. Please inventory all parts before
beginning case construction.
Parts List
"
Qty Part
Description
!
1
VEC-821K Cabinet Chassis
!
1
VEC-821K Cabinet Cover
!
1
Kit Decal Set; VEC-821K
!
3
Flat Metal Washer; .416"x.625"x.062"
!
1
9MM Hex Nut
!
4
4-40 Hex Nuts
!
1
1/4" Mono Phone Jack
!
1
Screw-on Terminal Strip
!
1
1" x 1" Double -Sided Tape
!
4
Round Rubber Feet
!
2
Small Tapped "L" Brackets
!
6
4-40 x 3/16" Phillips Machine Screws
!
2
#4 x 3/16" Round Aluminum Spacers
!
1
3/8" Hex Nut
!
2
4-40 x 1/2" Phillips Machine Screws
!
1
9 Volt Battery Clip
In addition to the above pieces of hardware, you should still have a thin steel flat
washer, a 3/8" hex nut. These parts were left over from the VEC-821K kit. You
were asked not to discard them, because they will be needed when you installed
the circuit board in an enclosure. If possible, locate them.
