EN
CS 300 RM Gate Controls / Rev. B 1.0 – 11
Operating mode 2: ADJUSTMENT
In deadman mode, the OPEN/CLOSED end positions can be set.
LED displays:
H1
H2
Status
The OPEN end position is programmed at this door position.
The CLOSED end position is programmed at this door position.
The CLOSED and OPEN end positions are not programmed at this door position.
6.3 Setting the end positions
Setting the OPEN end position
Change the mode of operation to ADJUSTMENT by pressing the (P) button.
Press the (+) button to drive the door to the desired end position in the OPEN direction.
Adjust the mechanical limit switches.
Change to AUTOMATIC mode by pressing the (P) button.
Setting the CLOSED end position
Change the mode of operation to ADJUSTMENT by pressing the (P) button.
Press the (-) button to drive the door to the desired end position in the CLOSE direction.
Adjust the mechanical limit switches.
Change to AUTOMATIC mode by pressing the (P) button.
Warning!
The door can be damaged if driven beyond the end position.