EN
CS 300 RM Gate Controls / Rev. B 1.0 – 25
12. EC Declaration of Incorporation
We hereby declare that the product described below:
CS 300 RM Door Controls
is in conformity with all essential requirements of the Machi-
nery Directive (2006/42/EC).
This partly completed machinery complies with all the regula-
tions of the EC Construction Products Directive (89/106/EEC),
EC Electromagnetic Compatibility Directive (2004/108/EEC)
and the EC Low Voltage Directive (2006/95/EC).
The following standards were applied:
EN 60204-1
Safety of machinery - Electrical equipment of machines, Part
1: General requirements
EN 12100-1
Safety of machinery - Basic concepts, general principles for
design, Part 1: Basic terminology, methodology
EN 12453
Safety in use of power operated doors - Requirements
EN 12604
Doors and gates - Mechanical aspects - Requirements
EN 61000-6-2
Electromagnetic compatibility (EMC) - Part 6-2: Generic stan
-
dards - Immunity for industrial environments
EN 61000-6-3
Electromagnetic compatibility (EMC) - Part 6-3:
Generic standards - Emission standard for residential, com-
mercial and light-industrial environments
EN 60335-1
Household and similar electrical appliances - Safety
EN 60335-2-103
Particular requirements for drives for gates, doors and win-
dows
Manufacturer and manager of documentation
MFZ Antriebe GmbH & Co. KG, Neue Mühle 4, 48739 Legden,
Germany
The special technical documents were prepared in accordance
with Annex VII, Part B of EC Machinery Directive 2006/42/EC.
We undertake to supply these documents, in electronic form
and within a reasonable period, in response to a duly rea-
soned request from the market surveillance authorities.
The partly completed machine may not be set in operation
until it has been ascertained that the machine in which the
partly completed machine is to be installed complies with all
the requirements of Machinery Directive (2006/42/EC).
Place and date
Legden, 1 October, 2013
Manufacturer’s signature
Dirk Wesseling
Job description of the signatory
Director
