YOUR GUITAR
OFF/Volume Dial
Button Chords
F Minor
G Major
A Major
Mode Switch
Play with the Band
Free Play
Solo Jam
Bluetooth®
ATTACHING THE STRAP
1. Locate both pins on the guitar.
NOTE: The second pin is located on the back.
2. Insert the pinhole on the straps into the pins on the guitar.
3. To adjust the strap, pull on the strap and slide the buckle up or down.
To turn on the guitar, turn
the dial to the volume.
1
2
3
2
IMPORTANT INFORMATION
• The batteries included are for in-store demonstration. It is recommended to change the batteries before playing.
• To conserve battery power, always turn the unit off by moving the dial to the off ( )position.
• After 30 seconds of no activity, the unit will go into sleep mode. Strum the strings or press the chord buttons to wake it up.
• Only attach the strap included to the guitar included in this kit.
3
Locate the mode switch on the guitar and move the switch to the desired mode.
Instantly join the band and live out your
musical dreams! While in this mode, the
band will play in the background. Strum
the strings to add the guitar to the band.
Compose your own tune! While in this
mode, strum the strings and press the
chord buttons to play rhythm guitar
without the band.
Jam out to your own customized guitar
solo! While in this mode, strum the strings
and press the chord buttons to play solo
without the band.
Jam out to your favorite song by connecting the
guitar to your device. Here’s how:
1. Move the Mode Switch to the Bluetooth® icon. It
will continuously play music while it is
searching for your device.
2. Open the settings menu on your device.
3. Select Bluetooth® on your device and make sure
it is on.
4. Your device will search for the guitar.
5. Select the name “
MGA Acoustic Guitar
” to connect
your device.
Note: The instrument can only connect to one smart device
at a time. You will not be able to connect two devices to the
same instrument.
When using your device, follow the below steps.
1. Connect the device to your guitar. Follow the steps under Bluetooth®.
2. Make sure the volume on your device is set to the maximum volume.
3. Choose your favorite song.
4. Make sure the song is on pause.
5. Continuously strum the strings to start the song. If you stop playing
the guitar, the song will continue for a few seconds and then pause.
Play the guitar again to continue the song.
For the best experience, choose a song that fits the instrument’s genre.
TROUBLESHOOTING
Instrument isn’t playing the device’s song.
PROBLEM
POSSIBLE SOLUTIONS
• Make sure the device is connected through Bluetooth®.
• Make sure the volume on the device is turned all the way up.
• After choosing a song, exit the app but don’t close it. Alternatively,
you can put the phone to sleep, but make sure the app is still
running in the background.
Instrument stopped working.
• The batteries included in the instrument are for in-store
demonstration. It is recommended to replace the
batteries before playing.
• Make sure it is on and the volume is turned up.
SUPERSTAR
PLAY
MODES
4
PLAY BAND
WITH
THE
FREE PLAY
SOLO JAM
COLLECT THEM ALL!
EACH SOLD SEPARATELY.
DRUM SET
KEYBOARD
DJ MIXER
ELECTRIC GUITAR
Motion Sensor
Tilt the guitar to control the speed.
• Tilt it 55 to approximately 125 degrees up to go faster.
• Tilt it back down to its original position to go back to its
normal speed.
Faster
Normal
Jam out to your favorite song!
Start your own band!
Strings
When strumming
the strings, make
sure to strum in the
area shown here.
