The EPS 6000 UPS, SSC, battery, and all auxiliary equipment is listed for safety by
Underwriter’s Laboratories, Inc. (UL) under UL Standard 1778 and under Canadian Standards
Association (CSA) standard C22.107.
Major components of the EPS 6000 UPS family include:
•
EPS 6000 UPS module
•
EPS 6000 SSC static switch cabinet
•
EPS 6000 SSC maintenance bypass cabinet
•
EPS 6000 auxiliary cabinet
•
EPS 6000 battery cabinet
Each of these cabinets is described below. Figure 1-1 and 1-3 show an EPS 6000 single-
module UPS. Figure 1-2 and 1-4 show single-line diagrams of typical single-module
installations (one UPS module, and one battery). Figure 1-5 shows a 750 kVA EPS 6000 UPS.
Figure 1-6 shows a single-line diagram of a typical 750 kVA system installation. Table 1-1
identifies single-module EPS 6000 UPS model numbers.
Figure 1-7 shows a typical shared UPS installation, consisting of one static switch cabinet
(SSC), two UPS modules, and two adjacent battery cabinets. Figure 1-8 shows a single-line
diagram of the same shared UPS installation. Table 1-2 identifies EPS 6000 UPS model
numbers for modules used in shared systems, and Table 1-3 identifies EPS 6000 SSC model
numbers.
1 — 2
Introduction
EPS 6000 Uninterruptible Power System
Summary of Contents for EPS 6000
