www.mgeups.com
T H E U N I N T E R R U P T I B L E P O W E R P R O V I D E R
Network Management Cards – User Manual
34003676EN/AA
Page 23/42
◗
Manager login:
Text field limited to 10 characters. Enables secure access to the sections of the
Configuration menu. Default value “MGEUPS”.
◗
Enter New Password:
Text field limited to 10 characters. Enables secure access to the sections
of the Configuration menu. Default value “MGEUPS”.
◗
Confirm New Password:
Text field limited to 10 characters. Must be strictly identical (including
upper/lower case) to the field above .
◗
Current Community Read-only is:
Enables read-only SNMP access control (GET). Default value
“public”.
◗
Change Community Read-only:
Text field limited to 31
characters. This field is only validated
after clicking on
“Save”
. Default value “public”.
◗
Current Community Read/Write is:
Enables read and write SNMP access control (GET and
SET). Default value “public”.
◗
Change Community Read/Write:
Text field limited to 31
characters. This field is only validated
after clicking on
“Save”
. Default value “public”.
◗
Change Trap Port Number:
Numeric field limited to 65534. Enables forwarding of traps sent by
the card to a port other than the port usually used for SNMP. Default value 162.
Comment:
Modification of these fields is freely accessible. Modification is only effective after clicking on
“Save”
.
Login and password are required systematically if they have not been entered previously.
3.4.5 Time
Click the
“Time”
section in the menu.
This menu enables initialisation of the date and time of the card in three different ways.
Date format is always the same: day/month/year.
