3
Brief introduction for Remote Beeper
Waterproof Remote Beeper:
Beeps with a tone and frequency set by the user.
On/Off button:
Turns the Remote Beeper on/off. Also set to be ready to encode the transmitter
and Remote Beeper by holding the on/off button for 10 seconds.
Receiver indicator Light:
Indicates when turned on/off and also serves as low-battery indicator
and when fully charged.
Charging Jack with cover:
For connecting the charger.
Charging your devices
Lift the rubber cover protecting the Charging Jack.
Plug the charging lead into the Charging Jack Socket.
Plug the charger into a standard wall outlet
Low
battery
and
charging
indications
for
Remote
Transmitter
Please charge when the Low Battery sign shows up
Charge for 3 hours
Low battery and charging indications for Training Collar and Remote Beeper
When the battery is low, the green light will flash once every second changing from flashing twice
every second.
When charging, the green light will change to red without flashing.
When fully charged, the red LED light will turn off.
On/Off Button
Indicator Light
Charging Jack Socket
Contact Points
Beeper Speaker
Charging Jack Socket
On/Off Button
Indicator Light
Training Collar
Remote Beeper
