4
How to set the Training Collar to work with a Remote Transmitter
Press the On/Off button to turn on the Training Collar. The Green indicator light flashes twice per
second. Now the Training Collar is in Standby status.
Turn the Training Collar off and the Green LED light goes out.
Press and hold the ON/OFF button for 3 seconds and the Training Collar indicator light will come on
and stay for 10 seconds. You must encode the Remote Transmitter with the Training Collar within
these 10 seconds. Choose channel 1 or 2 by pressing the Mode button and then press the
Transmitter button Y to confirm. The confirmation must be done within those 10 seconds, otherwise
you have to turn it off and start again.
For a second Training Collar, just choose the other channel and repeat the above.
How to set the Remote Beeper to work with a Remote Transmitter
Press the ON/OFF button to turn on the Remote Beeper, the Green indicator light flashes twice per
second. Now the Remote Beeper is in the Standby status.
Turn the Remote Beeper off and the Green LED light goes out.
Press and hold the ON/OFF button for 3 seconds and the Beeper indicator light will come on and
stay on for 10 seconds. You can choose channel 1 or channel 2 by pressing the Mode button and
then press the Transmitter button Y to confirm. The confirmation must be done within those 10
seconds, otherwise you have to turn it off and start again.
For a second Remote Beeper, just choose the other channel and repeat the above.
Operation between Remote Transmitter and Training Collar
Before use, please make sure the Remote Transmitter has been encoded with Training Collar
as per the above instructions.
Fitting the Charging Cable
To the Collars
