1
DTC-WP
Waterproof and Re-chargeable Dog Training Collar
1.
Antenna
2.
LED light
3.
Red LED light (launch or charging)
4.
LCD display
1-100 level
Static shock mode
Vibration mode
Beep mode
Light mode
Channel 1
Channel 2
Low battery
5.
Up/down button
6.
LED light button
7.
Channel button
8.
Launch button
9.
Mode button
10.
Charging jack
◘
Features
1.
100 levels of vibration.
2.
100 levels of static correction (optional).
3.
The levels can be altered by use of up & down button.
4.
A tone button activates a tone on the Collar Receiver.
5.
The system can be used for 1 or 2 receivers.
POWER SAVING
6.
The Collar Receiver will TURN OFF if it is unused for 4 minutes.
7.
Any movement will activate the Collar Receiver into STANDBY MODE.
8.
The Transmitter will go into STANDBY MODE if there is no operation after 20 seconds and
turn off after 2 minutes.
◘
To
Prepare the Remote Hand-held Transmitter
Charge the Remote Hand-held Transmitter
1.
Connect the charger connector to the charging jack.
2.
Plug the charger into a power outlet
