Blaze EMS-2 Operating Manual
Page 10
4.1 Exiting the menu system
Press the F1/Up button to exit the menu system when the “EXIT” soft key is shown. All changes made during navigation
of the menu system will be saved in non-volatile memory upon exiting. The instrument will not save any changes if you
remove power before exiting the menu system.
4.2 Flight Timer
View Flight Log:
Use the rotary control to view the next flight log entry.
Erase Flight Log:
Use this function to erase the flight log stored in the EMS-2.
FLIGHT:
Select whether you want the EMS-2 to automatically detect a flight or whether the pilot must press the F1/Up button to
start/stop a flight. We recommend you select automatic flight detection either on RPM1 or RPM2.
T/O RPM:
This menu option is only shown if the “RPM1” or "RPM2" flight mode is selected. Enter the RPM take off threshold that
you want the flight timer to start incrementing.
