XTreme-EMS Operating Manual
Page 40
4.3.7 Oil Pressure Setup
OIL PRESSURE DISPLAY:
This enables or disables the oil pressure display
TYPE:
Select if you are using a resistive, voltage or current output pressure sender.
If the
“RESISTIVE”
pressure sender is selected
SENDER:
Select what type of resistive pressure sender you are using. Select
“VDO”
for VDO / resistive senders,
“USER”
for a
custom sender.
MODEL:
Select which VDO pressure sender you are using. A selection between a VDO 2, 5 or 10 Bar can be selected.
If the
“VOLTAGE”
pressure sender is selected
Sender:
Select the type of voltage sender you are using. Select “UMA” for UMA senders, "0.5-4.5V" for voltage senders, or
“USER” for a custom voltage sender.
Model:
For UMA senders select the UMA model number.
If the
“CURRENT”
pressure sender is selected
Sender:
Select the type of current sender you are using. Select “4-20mA” for Rotax 912/914 4-20mA sender or “USER” for a
custom 4-20mA sender.
Summary of Contents for XTreme - EMS
Page 23: ...XTreme EMS Operating Manual Page 23 4 3 EMS Setup...
Page 70: ...XTreme EMS Operating Manual Page 70 12 Dimensions 12 1 Front view...
Page 71: ...XTreme EMS Operating Manual Page 71 12 2 Side view Version 1 12 3 Top view Version 1...
Page 72: ...XTreme EMS Operating Manual Page 72 12 4 Side view Version 2 12 5 Top view Version 2...
