Pag.
11
a
21
A20H0019
SERIE BMO
Use and maintenance
ENGLISH
We would like to thank you for trusting us and buying our product. Before starting the motor, we
advise you to read these instructions carefully, which should be kept together with it.
Should any difficult arise, please contact the MGM organization, specifying the type of product and its
serial number.
Field of application
This Use and Maintenance book is valid for electric motors belonging to the BMO series (BMO,
BMXO, BMOE, BMXOE, BMOEAV, BMXOEAV, BMOAV, BMXOAV, BMOMP, BMOSV, BMXOSV,
BMOESV, BMXOESV). For special execution motors please refer to the additional instructions which
must be kept with this manual.
Further information are available on our web site (
www.mgmrestop.com
).
BMO series includes asynchronous three-phase or single-phase totally enclosed fan cooled brake
motors.
The brake functions only when electrically supplied
. BMO series-motors are used as
components in industrial applications.
Performance and characteristics shown on the motor nameplate are guaranteed for installations in
ambients having a temperature range between -15° C and +40° C at an altitude below 1000 m above
sea level.
General safety information
During operation, motors have live or moving parts. Therefore, removal of electrical or
mechanical guards, improper use, or inadequate maintenance may cause serious damage
to persons or property.
Installation, Maintenance, Adjustment, Replacement operations of components must be
carried out by qualified personnel, using proper tools and working instruments. Above
all, it is essential to verify that motor or plant are disconnected from the supply line and
that on the terminal board there is no voltage left.
Avoid contact with the motor case since the temperature under normal operating
conditions may exceed 50°C.
Receipt and Storage
When receiving the motor, it is essential to check that all the characteristics shown on the
motor nameplate correspond to the requested ones and that the motor has not been
damaged during transportation. Any damage must be pointed out to the carrier
immediately.
