© MHG Heating Ltd
7
MHG Heating Ltd Unit 4 Epsom Downs Metro Centre, Waterfield, Tadworth, Surrey KT20 5LR
Telephone 08456 448802 Fax 08456 448803 Email
info@mhgheating.co.uk
Web www.mhgheating.co.uk
140116
4.2 Mounting Information
Attach the wall rail with the enclosed fastening set.
The mounting set consists of:
2 PCs. Hexagon Woodscrew 8 x 65 DIN 571, SW13
2 PCs. Wall plugs S10
2 PCs. washers 8.4 DIN 125, steel A3B
5.0Delivery and Mobility
All ProCons are supplied fully tested and therefore may contain residual test water.
The test water utilised contains additives that will help prevent the pump from sticking and other metals from
oxidising.
To maintain the structural integrity of the appliance the internal components should not be used during the
lifting and positioning of the unit onto the wall bracket.
All packaging materials should be disposed of in an environmentally way.
5.1Case Removal
To remove the case insert a flat blade screwdriver or similar into the black latch slots and turn through 90
0
.
Pull the base of the cover forward and up to release the hooks at the top. Ensure that the earth cable is
removed prior to lifting the cover clear.
The lower case housing the display panel can be hinged down to allow greater access to all internal
components.
The lower case is secured on either side by screws located on the front edge of the case.