MHG Heating Ltd ©
MHG Heating Ltd. Unit 4 Epsom Downs Metro Centre, Waterfield Tadworth Surrey KT20 5LR
P: 08456 448802 F: 08456 448803 E:info@mhgheating.co.uk W:
www.mhgheating.co.uk
01/01/10
48
13.Installing the collectors
Have the M10 hexagonal bolts (3.6/ 4.7), small spacer sleeves (6.3), large spacer
sleeves (3.9/ 4.10), spring washers (3.7/ 4.8) and M10 hexagonal nuts (3.8/ 4.9) ready
for fastening the collector.
If you lay the collector on the surface for a short time, it may be necessary to use
an underlay to avoid damage to the frame.
The help of a second person is required to position the collector and fix it in place.
Installing one collector
If only one collector is being installed, the distance A between the U-pieces is 1025
mm. If this is the case, both U-pieces are positioned under the collector. The T-
pieces are attached to the U-pieces or the supporting tubes according to the
enlargements on the right of pictures 1 and 2.
