background image

Made in China

Attention

1. Remote controller only control specified Mi-Light products; not all Mi-Light series can 

work on this remote controller.

2. In the using of the remote, if the indicated lamp blinking quickly, pls change the battery 

in time. Pls don’t use poor quality battery to avoid the leaking of battery liquid to 
damage the remote controller.

3. Please keep your finger off the touch ring when installing the batteries, to  improve 

its sensitivity, and use the remote ( 3 seconds later ) after the batteries are installed. 
Please reinstall the batteries, if the fouch ring is found low-sensitivity.

4. This 2.4GHz remote control system is precise electronic product; don’t use it in humid, 

high temperature, dust and high voltage environment; Saving it at indoor, dry and no 
static electricity environment.

5. Pls don’t use the remote controller on the wide-range metal or strong electromagnetic 

wave area, otherwise, it will badly affect the controlling distance.

Linking Instructions

If the light not blink slowly, the linking failed, Pls switch off the light 
again, and follow the above steps again.

Switch off the light, 
after 10 seconds 
switch on again

1

2

Power

3

The light blink 3 times 
slowly means the linking is 
done successfully.

Power

When the light on, short press 
press 

" ON " 3 times

 within 3 

seconds

Unlinking Instructions

If the light not blink quickly, the unlink failed, pls switch off the light 
again, and follow the above steps to unlink again.

Power

3

The light blinking 10 times 
quickly, means the unlinking 
successfully.

Power

Switch off the light, 
after 10 seconds 
switch on again

1

When the light on, short press

 " ON " 5 times 

within 3 

seconds

2

Linking&Unlinking

Remark: 

The light can be working after linking with the remote controller.

Dynamic mode switching button.

Accelerate the speed under present dynamic mode.
Under static mode, Long press for 2 seconds, the light shine once, 
the light will be off after 10 minutes

.

Slow the speed under present dynamic mode.
Under static mode, Long press for 2 seconds, the light shine once, 
the light will be off after 60 seconds.

Link/Unlink

button

Link/Unlink

button

Reviews: