Controller connect to RGB LED strip diagram
AC
DC12V/24V
AC TO DC
+
R
G
B
V+
INPUT
V+
R
G
B
OUTPUT
RGB LED Strip Controller
Model No.: FUT043
Input voltage: DC12V~24V
Output: 6A/Channel
Total output Max: 15A
Working temp.: -20~60°C
RF: 2.4GHz
Subordinate New Brand
Transmitting power: 6dBm
Controlling distance: 30m
www.futlight.com
Made in China
Controller connect to RGBW LED strip diagram
AC
DC12V/24V
AC TO DC
+
R
G
B
W
V+
INPUT
V+
R
G
B
W
OUTPUT
RGBW LED Strip Controller
Model No.: FUT044
Input voltage: DC12V~24V
Output: 6A/Channel
Total output Max: 15A
Working temp.: -20~60°C
RF: 2.4GHz
Subordinate New Brand
Transmitting power: 6dBm
Controlling distance: 30m
www.futlight.com
Made in China
Controller connect to RGB+CCT LED strip diagram
AC
DC12V/24V
AC TO DC
+
R
G
B CW WW
V+
INPUT
V+
R
G
B
CW
OUTPUT
WW
RGB+CCT LED Strip Controller
Model No.: FUT045
Input voltage: DC12V~24V
Output: 6A/Channel
Total output Max: 15A
Working temp.: -20~60°C
RF: 2.4GHz
Subordinate New Brand
Transmitting power: 6dBm
Controlling distance: 30m
www.futlight.com
Made in China
Dynamic Mode
Saturation
Brightness
&Speed
Adjustable
Unadjustable
Unadjustable
Seven color gradual change
White light Gradual change
RGB gradual change
Seven color jump to change
Jump to change randomly
Red light gradual Flash 3times
Green light gradual Flash 3times
Blue light gradual Flash 3times
White light gradual Flash 3times
1
2
3
4
5
6
7
8
9
Adjustable
Adjustable
Number
6. Dynamic Mode Sheet
9. Attention
1. Please check whether the input voltage of the constant voltage power supply is in accordance
with the controller, and please check the connection of both the cathode and anode, otherwise
the controller will be broken.
2. Please don’t connect wires with power on. Please turn on again only when it is in right
connection and no short circuit.
3. Please do not use the controller in the place with widely range metal area or strong
electromagnetic wave nearby, otherwise, the remote distance will be seriously affected .
8. Controller connect to LED strip diagram
Unlinking Instructions
The light blink 3 times
slowly means the linking is
done successfully.
3
If the light not blink slowly, the linking failed, Pls switch off the light again,
and follow the above steps again.
7. Linking&Unlinking
Linking Instructions
Switch off the light,
after 10 seconds
switch on again.
1
When the light on, short
press " ON "
3 times
within 3 seconds.
2
The light blinking 10 times
quickly, means the unlinking
successfully.
3
If the light not blink quickly, the unlink failed, pls switch off the light again, and
follow the above steps to unlink again.
Switch off the light,
after 10 seconds
switch on again.
1
When the light on, short
press " ON "
5 times
within 3 seconds.
2
Remark:
The light can be working after linking with the remote controller.
B
+
G
R
Power
Supply
controller
B
+
G
R
Power
Supply
controller
B
+
G
R
Power
Supply
controller
B
+
G
R
Power
Supply
controller
Link/Unlink
button
Link/Unlink
button
www.futlight.com
Made in China
