M
‑
I SWACO
MONGOOSE PRO Shale Shaker
46
Field Installation and Operation Manual 9092F02001AENG (D)
46
20.
PARTS DRAWINGS AND LISTS
20.1
Assemblies, Sub-Assemblies, Spare Parts Lists, Additional Hardware
20.1.1
Rig Critical Spares (1 Year)
NOTE
READ THIS ENTIRE SECTION BEFORE PLACING ANY MOTOR ORDERS.
REFER TO HYDROCYCLONE DOCUMENTATION FOR SPARE PARTS INFORMATION
SATISFYING THE HYDROCYCLONE COMPONENTS OF A MONGOOSE PRO MUD
CLEANER.
The following pages in this section contain Rig Critical Spare Parts Lists for the following general configurations:
•
MONGOOSE PRO Shale Shakers
•
Dual MONGOOSE PRO Shale Shakers
•
Triple MONGOOSE PRO Shale Shakers
•
Quad MONGOOSE PRO Shale Shakers
For quick reference, Table 4 provides an overall Rig Critical Spares (1 Year) List. It contains the part number for
every MONGOOSE PRO Rig Critical Spares (1 Year) Kit. Ordering one of these kits will provide rigs with all
parts necessary to operate and maintain a unit for one year. Spare parts kits are grouped by the quantity of baskets
and configuration motor voltage.
The MONGOOSE PRO Rig Critical Spare Parts List (Refer to Table 5) and exploded view (Refer to Figure 36)
identifies the spare parts required to keep the unit operating in the field. The basket assemblies and skids in the
Dual, Triple and Quad MONGOOSE PRO Shale Shaker exploded views have been removed to call attention to
the additional spare parts for each unique configuration.
Dual MONGOOSE PRO Shale Shaker assemblies require the same spare parts (in addition to the unique spare
parts required to maintain Dual Shale Shaker assemblies) as a single MONGOOSE PRO Shale Shaker.
Therefore, line item one in the Dual MONGOOSE PRO Shale Shaker Spare Parts List (Refer to Table 6) refers to
the entire MONGOOSE PRO Shale Shaker Spare Parts List, with a quantity of one.
Triple and Quad MONGOOSE PRO Shale Shaker assemblies require twice the quantity of spare parts (in
addition to their own unique spare parts) as a single MONGOOSE PRO Shale Shaker. Therefore, line item one in
both the Triple MONGOOSE PRO Shale Shaker Spare Parts List (Refer to Table 7) and the Quad MONGOOSE
PRO Shale Shaker Spare Parts List (Refer to Table 8) both refer to the entire MONGOOSE PRO Shale Shaker
Spare Parts List, with a quantity of two.
Additionally, this section also contains a breakdown of MONGOOSE PRO motor kits for both the fixed (Refer to
Table 9) and swing (Refer to Table 10) weight motors.
In the event of a swing weight motor failure, a fixed weight motor can be substituted in its place. While any Shale
Shaker unit will retain basic functionality with two fixed weight motors, this setup will severely limit the unit’s
performance; Dual-motion functionality is not possible for units operating with two fixed weight motors.
To avoid any significant operation downtime, M
‑
I SWACO recommends ordering a replacement Swing Weight
Motor Kit from Table 10 as soon as possible after swing weight motor failure.
