FEATURES LISTING
1. Decal-Warning/Caution/Operating
2. Decal-Caution: Engine Fuel
3. Decal-Warning: Muffler Hot
4. Engine
5. Pump
6. Water Inlet Strainer
7. Water Inlet
8. Water Outlet
9. Heat Dump Valve
10. Detergent Strainer
11. Detergent Hose
12. Oil Sight Glass
13. Adjustable Unloader Knob
14. High Pressure Discharge Hose
15. Gun Assembly
16. Decal-Warning: Risk of Injection
17. Quick Connect Nozzle
Page 5
RenTrain INC
www.masterental.com
ADJUSTMENT PRECAUTIONS:
1. NEVER alter or modify the equipment, be sure any accessory items and system components being used
will withstand the pressure developed. Use ONLY genuine Mi-T-M® parts for repair of your pressure
washer. Failure to do so can cause hazardous operating conditions and will void warranty.
2. NEVER make adjustments to the machinery while it is connected to the engine without first removing the
ignition cable from spark plug. Turning the machinery over by hand during adjustment or cleaning might
start the engine and machinery with it, causing serious injury to the operator.
3. Know how to stop the pressure washer and bleed pressures quickly. Be thoroughly familiar with controls.
4. Before servicing the unit; turn the unit off, relieve the water pressure, and allow the unit to cool down. Do
not make repairs while unit is running. Service in a clean, dry, flat area. Block the wheels to prevent the
unit from moving.
5. Follow the maintenance instructions specified in this manual.
! SAVE THESE INSTRUCTIONS !
IMPORTANT SAFETY WARNINGS
JP FEATURES
NOTE: This drawing is
referenced throughout the
manual
.
Locations of specific
items will be noted by listing
the REFERENCE # in
parenthesis.
Example: Engine (4)
