8
Mi-T-M
®
Pit Cleaner Operator's Manual
High-pressure water flows from the existing
Pressure Washer (1)
into the
Gun/Lance (2)
of the Pit Cleaner where it is
directed into the
Sludge Pump (3)
. The high-pressure stream is directed up into the
PVC Body (4)
of the Pit Cleaner
creating a vacuum (venturi effect) at the bottom opening of the Sludge Pump. This vacuum pulls liquids, sludge, and or
solids from the bottom of the pit into the
PVC Body (4)
of the Pit Cleaner where it mixes with the high-pressure flow from
the
Pressure Washer (1)
. This mix is then forced out through the back end of the Pit Cleaner and into the
PVC Hose
(5)
, the hose directs the mixed flow into the
Sludge Cart (6)
. The mixed flow is then deposited into the Filtration Bag
where the solids and sludge materials are filtered from the water, and retained in the bag allowing the cleaned water to
return to the pit system.
PIT CLEANER SYSTEM FLOW CHART
PIT
-0027-022900-JJ
