Mi-T-M
WOS-SERIES Operator's Manual
3
Congratulations on the purchase of your new Mi-T-M Oil/Water/Solids Separator! you can be assured your Mi-T-M
Oil/Water/Solids Separator was constructed and designed with quality and performance in mind. Each component has
been rigorously tested to ensure the highest level of acceptance.
This operator's manual was compiled for your benefit. By reading and following the simple safety, installation, operation,
maintenance and troubleshooting steps described in this manual, you will receive years of trouble free operation from
your new Mi-T-M Oil/Water/Solids Separator. The contents of this manual are based on the latest product information
available at the time of publication. Mi-T-M reserves the right to make changes in price, color, materials, equipment,
specifications or models at any time without notice.
! imporTanT !
These paragraphs are surrounded by a "SaFETY aLErT BoX". This box is used to designate
and emphasize Safety Warnings that must be followed when operating this oil/water/solids
separator. accompanying the Safety Warnings are "signal words" which designate the degree
or level of hazard seriousness. The "signal words" used in this manual are as follows:
DANGER
: indicates an imminently hazardous situation which, if not avoided, WiLL
result in death or serious injury.
WARNING
: indicates a potentially hazardous situation which, if not avoided, CoULD
result in death or serious injury.
CAUTION
: indicates a potentially hazardous situation which, if not avoided maY
result in minor or moderate injury.
The symbol set to the left of this paragraph is a "Safety alert Symbol". This symbol is used
to call attention to items or procedures that could be dangerous to you or other persons
using this equipment.
aLWaYS proViDE a CopY oF THiS manUaL To anYonE USinG THiS EQUipmEnT. rEaD
aLL inSTrUCTionS BEForE opEraTinG THiS oiL/WaTEr/SoLiDS SEparaTor anD
ESpECiaLLY poinT oUT THE "SaFETY WarninGS" To prEVEnT THE poSSiBiLiTY oF
pErSonaL inJUrY To THE opEraTor.
Once the unit has been uncrated, immediately write in the serial number of your unit in the space provided below.
SEriaL nUmBEr_________________________________
Inspect for signs of obvious or concealed freight damage. If damage does exist, file a claim with the transportation
company immediately. Be sure that all damaged parts are replaced and that the mechanical and electrical problems
are corrected prior to operation of the unit. If you require service, contact Mi-T-M Customer Service.
CUSTOMER SERVICE
Call OUR TOll-FREE NUMBER
for the Sales or Service Center nearest you!
800-553-9053
please have the following information available for all service calls:
. Model Number
2. Serial Number
3. Date and place of purchase
inTroDUCTion
