•After approximately seven seconds of applying power the Status LED illuminates for
6 seconds, then turns off, then illuminates again for approximately 6 seconds,
followed by a voice message, “Welcome to MI Witness.” After approximately 5 seconds
the Status LED flashes, with a voice message, “Continuous recording begins.”
Now the camera is in normal recording mode.
•If the internal battery is not fully charged, the red LED will be ON.
The Red LED will turn Off when the battery is fully charged.
2.1 Connecting Power and Powering Up
16
Status LED
Charge LED
1sec
[charging]
Charge LED
[complete]
02 Getting Started