Prodomus
11
Clean the stainless steel surface with a slightly damp cloth and dry
thoroughly. If necessary cook some water, empty and rinse the water kettle
afterwards to remove production residues that might be inside. Always take
care not to let water run into the electric parts of the unit.
Switch OFF after this process and unplug.
Open the lid empty the appliance and let it cool down.
Voltage switch
This appliance is equipped with a voltage switch for 110-240 V) on the bottom side.
You will find two plastic cups for the complete set in the delivery. When travelling,
you can save space by placing the two cups inside of the unit.
How to use the travel water kettle
Caution! Danger of burning!
The appliance gets very hot during operation.
During operation of electrical caloric appliances, high temperatures – by
boiling water, hot steam or hot body – are generated, which may cause
injuries. Never open the lid while the unit is in operation! Only touch the
cool touch handle and the release button to open or close! Never touch hot
lid or housing!
Caution! Always keep enough distance to heat or steam sensitive surface,
walls, furniture. Ensure that the cord does not touch hot parts of the
appliance like lid or housing.
Caution! Danger of overheating! Do not run the appliance without water or
with open lid!
Caution! Do not overfill the appliance to avoid overflow of cooking water!
Detach the lid and fill the reservoir with cold water. The quantity of water has
to be between MIN and MAX (see water level scale) – don't exceed or under-
run the indicators to avoid overflow of cooking water or overheating the unit.
Attach the lid carefully until it is fully locked. Plug in.The control lamp is
illuminated and shows that the water kettle is in operation.
The kettle switches off automatically some seconds after the water has boiled.
The boiling process can also be interrupted by plugging out.
If you want to reboil the water, it is necessary to let the water cool down a
while before the appliance can be switched on again. After a few minutes you
can push the RESET switch to restart the boiling process.
Important: Always ensure to attach the lid properly before starting to
boil water. If the lid is detached, the water will boil as long as it is totally
evaporated.
In order to prevent scald injuries, pay attention that neither hot water nor hot
steam can escape.
The appliance is equipped with a safety system and will automatically switch off,
should the kettle be operated accidentally without or with not enough water.
Important: Always unplug the appliance to switch off finally!
