PAGE 1
Thank you for your purchase!
These instructions show how to integrate the MicaSense RedEdge-M with a DJI Inspire 1. It covers
attaching mounting brackets included in the kit, powering the camera from the host system, and
placement of the Downwelling Light Sensor (DLS) and GPS unit.
What’s inside?
1
2
3
4
Quick Mount Adapter
RedEdge-M Mount
M2 x 6 mm screws (Qty 4)
5
6
7
8
9
M3 x 8 mm screws (Qty 4)
10
NOTE: Images are not shown to scale
11
Alcohol wipe
1
2
3
4
5
6
7
9
10
11
12
12
8
Go-Pro mount adapter
DLS/GPS Cable
Warning: This kit is not intended for any other RedEdge models other than the RedEdge-M.
Damage will occur if any other RedEdge model is connected.
Top-mount riser
Top mount
GPS base plate
DLS base plate
13
VHB tape squares (Qty 5)
4” nylon zip tie (Qty 4)
13
M2.5 x 16 mm (Qty 2)
M3 x 25 mm (Qty 3)
M2 spring washers(Qty 2)
M2 nuts (Qty 2)
M2 x 6 mm (Qty 2)
14
DLS Quick Connect board
14
DLS Quick Connect cables (Qty 2)
