3. Connect the provided Quick Mount Gen.2 RedEdge-MX cable to the RedEdge-MX
“PWR/TRG” and “DLS” ports.
Quick Mount Gen 2 Adapter attached to RedEdge-MX
Attaching the RedEdge-MX and DLS 2 to the Inspire
Once assembled, the Quick Mount Gen. 2 can quickly and easily be installed or removed from
the Inspire. Power is provided by the Inspire via the Quick Mount Gen 2.
1. Attach the assembled Quick Mount Gen. 2 (with connected RedEdge-MX) to the Inspire
using the DJI lock mechanism on the Inspire.
2. Use the provided 6-pin 60cm cable to connect the DLS2 and the RedEdge-MX. Plug the
DLS 2 cable from the DLS 2 port to the Quick Mount Gen. 2 “6-pin DLS” port.
3. When attached, the camera will be tilted forward slightly to compensate for the tilt of
the aircraft while flying.
Rev 01 - August 2019
PAGE 5
