Thank you for your purchase!
These instructions show how to integrate the MicaSense RedEdge-MX and/or Altum with a DJI
M300 RTK. It covers attaching mounting brackets included in the kit, powering the camera
from the host system, and placement of the Downwelling Light Sensor (DLS2) unit.
This kit is also compatible with RedEdge-M, as long as you also have a DLS2.
What’s inside?
1. Quick Mount Gen 2 Adapter (Qty 1)
2. 6-pin 60cm cable for DLS2 (Qty 2)
3. Altum to Quick Mount cable (Qty 1)
[Use with Altum sensor]
4. RedEdge-MX to Quick Mount cable
(Qty 1) [Use with MX sensor]
5. M3x0.5, 8mm BHCS Screws (Qty 2)
6. M3x0.5, 10mm BHCS Screws (Qty 2)
7. M2x0.4, 5mm SHCS screws (Qty 2)
8. M2 Lock Washer (Qty 2)
9. M2 Flat Washer (Qty 2)
10. M3 Lock Washer (Qty 4)
11. Spacer, 3mm (Qty 2)
12. Spacer, 6mm (Qty 2)
13. Loctite threadlocker (Qty 1)
14. Zip Ties (Qty 5)
15. Carbon fiber mount for DLS2 (Qty 2)
Images are not to scale
Rev 01 - July 2020
PAGE 2
