1. Attach the assembled Quick Mount Gen. 2 (with connected Altum) to the Matrice using
the DJI lock mechanism on the drone.
2. Plug the DLS 2 cable from the DLS 2 port to the Quick Mount Gen. 2 “6-pin DLS” port.
3. When attached, the camera will be tilted forward slightly to compensate for the tilt of
the aircraft while flying.
Warning: Failure to properly secure loose wires may lead to interference with the
aircraft propellers. This may damage the camera, drone, or both.
Rev 01 - July 2020
PAGE 8
