16:10
Choose this setting if the TV has a 16:10 aspect ratio, such as certain
computer monitors.
8.3.2 TV System
The player is able to output video in a wide range of video systems over HDMI or component
video. Consult the TV/HDTV’s manual for which video system it supports. For best results,
configure the player’s Video System setting to match the highest quality setting supported by the
TV/HDTV. “HDMI Auto” is recommended when the player is connected to the TV using an HDMI
cable.
Available settings: NTSC / PAL / 480P / 576P / 720P 50HZ / 720P 60HZ / 1080I 50HZ / 1080I
60HZ / 1080P 50HZ / 1080P 60HZ
8.3.3 Video Zoom
When turned on, this setting has the effect of zooming out slightly when playing video. This
setting is useful when used with TVs that have severe over-scan problems.
Setting
Description
Off
Videos are displayed as normal. Use this setting unless the TV has
severe over-scan problems.
On
Videos are displayed slightly zoomed out. Use this setting only if the TV
has severe over-scan problems.
8.3.4 1080P 24FPS
The player supports output of 1080P 24FPS at native timing. This mode provides the best result
for when viewing 24FPS movies.
Setting
Description
On
The player will output 24FPS video at native timing.
Off
The player will output all videos with 50/60Hz timing.
8.3.5 Deep Color
This setting configures the color depth of the player’s HDMI video output. Setting the player to a
higher color depth when used with a compatible TV will result in richer colors.
Setting
Description
Auto
Automatically determine the best color depth supported by the TV.
12-Bit
Always output 12-Bit color depth.
10-Bit
Always output 10-Bit color depth.
Off
Always output 8-Bit color depth.
8.4 Network Settings
The Network settings menu contains configuration items that determines how the player’s
network capabilities function.
