Copyright © 2009-2018 Micca All rights reserved.
V100-180618
4 Getting Started
4.1 Initial Setup
Find a flat and stable surface to place the photo frame. Plug the AC adapter into a
standard 110V AC or 240V AC electrical outlet and connect it to the DC Power Input on
the photo frame. The photo frame should automatically turn on and display the main
menu.
Carefully remove the protective film covering the LCD.
Remove the plastic battery insulator from the battery compartment and make sure
the remote control has a battery inside.
Your digital photo frame is now ready for use.
4.2 Basic Usage
The photo frame is very easy to use. It is pre-configured from the factory with default
settings that are already optimized for most users. Simply copy your favorite photos
onto an SD card or USB drive using a computer. Insert the SD card or USB drive into
the photo frame, turn the photo frame on, and the photos will automatically begin
displaying.
The factory default setting for displaying photos is to crop the image to fit the screen
and in random order with a 15-second interval. Please refer to the settings section for
information on how to change these and other settings.