14 |
Clear Bilight
which will turn the treatment lights on. For best results, it is
recommended that you treat one affected area for the
full 3 minutes treatment cycle (a beep will sound every 3
minutes).
Then, move the device to another area and start
treatment by touching the Treatment Head face to the
new area of skin. Repeat this process until all affected
areas have been treated with the blue light.
5.
Turn the Device OFF by pressing the ON/OFF button.
The Power Indicator Light will go off.
NOTE:
It is recommended that you keep the Device in contact
with the skin during the entire 3 minutes of treatment.
Should the Device be removed from the skin before completion
of the 3 minute treatment cycle, the treatment lights will turn off
and the Device will return to Standby mode. To continue with
treatment, simply touch the Treatment Head to your skin again
and the lights will turn back on.
RED LIGHT TREATMENT
1.
Make sure that the Device power is OFF.
2.
Remove the Blue Treatment Head and install the Red
Treatment Head following the instructions in “How to
Change the Treatment Heads” (page 9).
3.
Repeat Steps 2 and 3 above (under Blue Light
Treatment) to treat each of the skin areas with up to 3
minutes of Red Light.
WARNING:
Each affected skin area (for example, on your face)
should be treated with a maximum of 3 minutes of blue light and 3
minutes of red light per day. DO NOT exceed 6 minutes total blue and
red light treatment per affected skin area per day.
