sonicsmooth
|
9
5.
Starting: Press the ON/OFF Button to turn on
6.
Selecting Speeds: To customize your dermaplaning session,
sonicsmooth
provides a choice of 3 power/intensity settings (low, medium and high). We
recommend that you start on a lower speed setting and gradually increase
power/intensity as you get used to sonic dermaplaning.
After pressing the on/off button one time the unit will power on in low speed.
When you press the button again, the unit will change to medium speed.
Pressing the power button a third time will change the speed to high and
pressing the button one more time will shut off the device.
Through smart technology, if you hold the power button down for 2 seconds in
your favorite speed setting, the unit will power off and remember your favorite
setting the next time you power on the device. For example, when the unit is
powered on in medium speed setting, hold the button down for two seconds
to power off the device. When you press the button one time to power on the
device, the handle will power on in the medium speed setting
7.
Sonic Dermaplaning. After prepping your complexion with the degreasing
cleanser in the lavender tube, rinsing clean and patting skin dry, you are ready
to begin your session. There is no wrong way to dermaplane but if you would
like to mimic the pattern your aesthetician uses to perform a dermaplane
session, follow the tips below.
Caution: Pull hair back away from face and take precaution when using
around hairline and eyebrows.
