Michigan USA Raptor 900 User Manual Download

Page: 11 / 26

Raptor 900 Compact Wood Chipper/Shredder

E&OE

Engine Starting and Stopping

Starting Petrol Engines

FUEL

– Place the

fuel tap (

) in the

"ON" position (to

the right).

CHOKE

– If the

engine is cold,

place the choke (

)

in the "COLD"

position (to the left).

If the engine is

warm or ambient

temperature is high,

place in the "HOT"

position (to the

right).

IGNITION

– Place

the engine ON/OFF

switch (

) or key

switch (if equipped)

in the "ON" ("

position. For key

switches, the "OFF"

position allows the key to be

removed. The "ON" position is

reached when the key is rotated

to the right from the "OFF" position.

THROTTLE

– Place the throttle control

(

) just off the "SLOW" position.

START

– Slowly pull out the starter cord (

) until you feel it engage with the engine, then pull it out

rapidly (use both hands if necessary). The engine should start. Allow the starter cord to rewind slowly –

do not let it "snap" back.

WARM-UP

– Allow the engine to warm-up and run smoothly. If choke is being applied, place the choke

(

) in the "HOT" position.

THROTTLE

– Adjust the throttle control (

) for the required engine

speed.

If the engine does not start, repeat step 5 onward. If the engine fails to

start after several attempts, refer to

Troubleshooting

Stopping the Engine

1. Place the throttle control in the "SLOW" position. For diesels, loosen the throttle control – it should

automatically return to the engine OFF position (up).

2. If equipped, place the engine ON/OFF switch in the "OFF" position.
3. If equipped, place the fuel tap in the "OFF" position.

Video Tutorial:

Starting Petrol Engines

MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN

Summary of Contents for Raptor 900



























Search results

Summary of Contents for Raptor 900

Reviews:

Related manuals for Raptor 900

Brands by name

Popular brands

Michigan USA Raptor 900, User Manual

Search results

Summary of Contents for Raptor 900

Reviews:

Related manuals for Raptor 900

Brands by name

Popular brands